CDC Munitions Systems (2W051) Set A Volume 1 Practice Test

These questions are part of the practice quiz. Start practicing

• Which of the following is a responsibility of personnel conducting munitions inspections?
• What is a key factor when determining munitions employment in a conflict situation?
• Within how many work days must issue and expenditure paperwork be returned to document control to avoid being considered delinquent?
• What is the frequency of training required for pallet build-up personnel?
• Which type of wing performs a support function rather than an operational mission?
• Which inspections require the use of TO 11A-1-53 for munitions items?
• What is a munitions forecast called when it is returned from MAJCOM and auto-loaded into CAS?
• What is the major category code used for training munitions that go unused during normal training?
• Who is responsible for posting or changing the fire symbol?
• What is the primary purpose of the Munitions Accountable Systems Officer (MASO)?
• Which category does the term "consumption issue item" fall under?
• Which agency develops command supplements or directives for implementation?
• Who may authorize the local disposal of unserviceable and non-repairable inert munitions valued at less than $500 per item?
• What action is typically taken if a munitions container is found to be damaged?
• The Combat Ammunition System Expeditor Management program can be used to do what?
• Which of the following is a key responsibility of a munitions systems specialist?
• What is the significance of the two-person concept in nuclear weapon handling?
• Who is responsible for appointing certified munitions inspectors?
• Why is it important for the munitions accountable systems officer to monitor stock levels?
• The weapon storage and security system (WS3) is specifically designed to store which type of munitions?
• When would a crew chief stop an explosive operation?
• What type of inspection provides a high degree of confidence that munitions have not been adversely affected by their environment?
• What is the term for items that have had their explosive material removed and not replaced?
• How often will account custodians inventory risk category I missiles and rockets outside the munitions storage area?
• What are supplemental allocations requests called once they are approved?
• Who must ensure that customers outside the munitions unit are informed of suspended or restricted ammunition?
• Which type of issue is permitted to be processed during a semi-annual munitions inventory?
• What percentage of the inhabited building distance is used to determine the public traffic route distance for mass-detonating explosives?
• How many keys are typically received from the manufacturer with high/medium security locks?
• Who is responsible for acquiring and maintaining the pallet couplers, plastic coverings, tiedown straps, and dunnage for deployment packages?
• Who is responsible for conserving and protecting government property and supplies on an installation?
• What should be completed manually when the automated system to document maintenance data is unavailable?
• What are the main causes of munitions shortages in the Air Force?
• Who is responsible for establishing the recovery team for post-post procedures when the combat ammunition system is down?
• What regulatory measure is often employed for High-Risk items?
• Which phase is typically associated with the development of an expeditionary site plan?
• Where should a lite box be positioned in a storage stack?
• Requisitions to replace guidance and control units are based on which factor?
• What is the responsibility of the Element NCOIC in the munitions unit?
• What does the munitions accountability process include?
• What is an example of a container-in-container type that could be loaded in the combat ammunition system (CAS) for temporary storage of all-up-round munitions?
• Initial requirements for which of the following items are not requisitioned because they are automatically distributed to the installation?
• Which missile is not tracked using the Tactical Missile Reporting System?
• Who determines and assigns the appropriate condition codes to munitions assets?
• When using the transportation discrepancy report (TDR), which party is identified as the problem source?
• What is a major function of the vault control group within the WS3?
• At what skill level does an ammo troop perform tasks associated with day-to-day munitions operations as either a crew member or as a crew chief?
• What term is used to clearly indicate previously opened hermetically sealed containers?
• What document does the Global Ammunition Control Point (GACP) use to record the allocation decision?
• Munitions are grouped into the same hazard division when they have?
• What is the primary aim of the munitions accountability system?
• Within how many days must custody account custodians provide the munitions accountable systems officer (MASO) with expenditure requests after item consumption?
• Which publication provides information to measure intrinsic radiation of weapons in the stockpile?
• Which condition code best describes an item that is serviceable with qualifications?
• Which role coordinates with munitions control for logistical support on the flightline?
• Where is the fire symbol posted when all munitions in a storage area are covered by one symbol?
• When a time compliance technical order (TCTO) is received for a nonnuclear munitions item, which type of work order is generally created?
• Which process involves the assignment of munitions during forecasting?
• The War Consumable Distribution Objective contains information on munitions expected during what situation?
• What type of turn-in is defined as returning munitions items to base stock that were issued previously to a custody account?
• What is the primary goal of an Air Force safety program?
• Why is it important to adhere to maximum stacking limits in munition warehousing?
• What is the highest requisition priority used on a mission impaired request?
• Which regulatory guidance outlines explosives safety standards?
• Which document outlines procedures for handling munitions in emergencies?
• Which statement is a key principle of munitions warehousing?
• Under which physical security protection level do nuclear weapons fall?
• Which two supply references cover practices for US government property?
• Why is it important to emphasize reliability monitoring systems for air intercept missiles (AIM) and air-to-ground missiles (AGM)?
• Which role manages the munitions portion of the war consumable distribution objective?
• How many feet is the firebreak around the ventilators of earth-covered magazines?
• The nuclear weapon surety two-person concept is designed to:
• For munitions items that have had their explosive filler removed, how many holes are required to be drilled?
• How many hours does an organization have to install or consume an emergency issue item from the time of issue?
• Which system is considered the most efficient way of shipping munitions by ocean-going vessel?
• What is the purpose of the munitions management information system?
• In the event of a mishap, which agency is the first point of contact for safety reporting?
• When might a military shipment require a certification of equivalency?
• Which group is focused on ensuring proper munitions inventory practices?
• Who provides the base transportation office with a listing of personnel authorized to receipt for inbound munitions?
• What aspect is particularly important during a periodic inspection of munitions?
• What is the main objective of conducting internal inspections as per the Commander's Inspection Program?
• What type of issue describes the transfer of a munitions asset that will not be consumed or installed until an unspecified date?
• What is the first indication that munitions items may not be safe?
• If more than one condition code applies to an item being inspected, what should you do?
• What classification is given to a defect that is likely to result in a hazardous or unsafe condition?
• Which type of barricade is made using cohesive earth fill and must be free from organic matter?
• To aid the commander in determining personnel reliability, what is the best indicator of an individual?
• Where should the certificate of clearance be placed after inspecting empty munitions containers?
• Which element is responsible for ensuring that expenditure paperwork is accurately completed?
• Which category code is utilized to replace worn-out and damaged munitions items?
• Which agency coordinates risk category changes in munitions storage structures?
• What is the plan primarily developed for locations with a permanent Air Force presence?
• What classification applies to any vehicle found to be in a hazardous condition?
• What must be done before making a modification to munitions items?
• What type of door is recommended for a munitions control facility?
• How often must individuals assigned to nuclear weapons related materiel duties complete refresher training after the fundamental course?
• Who can carry out the MASO custody account inventory for geographically separated accounts?
• What condition is indicated by a DD Form 1574/1574-1 (yellow tag)?
• What action is taken if a barrier bag is found defective during inspection?
• The munitions associated with explosive class/division 1.4 are?
• When handling items manually, which body parts are most likely to be injured?
• Which element in the production section typically has inspectors assigned to inspect for munitions residue?
• Which of the following is a method to preserve the integrity of munitions during transit?
• Which of the following describes the role of the munitions control function?
• What is the term for stacking palletized munitions in the cargo hold of a vessel?
• What is the name of the website used by munitions personnel to maintain status of munitions activities and resources on an installation?
• What type of lot number is assigned to a combination of 5.56 mm ball and tracer packed together for field use?
• How frequently are courtesy storage agreements reviewed?
• During the munitions forecast process, which item's designation is particularly important?
• What storage method is designed to enhance explosive storage capacity without changing quantity distance separation requirements?
• What is a munitions item or component called when its explosive material is completely removed?
• What is considered an operations indicator and a potential operations security (OPSEC) vulnerability?
• Which major command provides technical assistance to mishap investigation boards?
• What is the primary role of munitions systems in the Air Force?
• What entity consists of at least 1,000 personnel and is composed of groups, squadrons, and flights?
• When does the Grandfather clause for performance-oriented packaging apply?
• War reserve materiel all-up-round missile with guidance and control units removed are known as?
• Which munitions element maintains and validates all auditable munitions records?
• What type of mission does a training wing represent?
• Who is responsible for appointing personnel authorized to process, ship, and receive arms, ammunition, and explosives?
• Which combat ammunition system (CAS) program displays the condition and status of stockpile and custody assets?
• Which organization executes product support and supply management for Air Force munitions and related assets?
• What information is conveyed by the second digit in the location designator?
• What is the primary focus of a Commander's Inspection Program (CIP)?
• What is the primary responsibility of munitions control?
• Which role is responsible for ensuring compliance with hazardous material handling regulations?
• Air Force explosive safety standards are identified in?
• Which barricade type is suitable for construction near aircraft during loading operations?
• Which reporting system is designed for tracking Air Force safety data?
• What is the purpose of munitions control risk assessments?
• If documentation for an incoming shipment is missing or incomplete, who should you notify immediately?
• What program provides combatant commanders with greater deployment flexibility for munitions?
• Who is responsible for approving the written agreement for storage of custody assets?
• What should be the first action in the event of a munitions accident?
• How often are training sessions required for personnel involved in pallet build-up?
• What tactical echelon provides operational leadership and supervision directly under the MAJCOM level of Command?
• The console group within the WS3 is primarily responsible for which capability?
• Which WS3 group offers communication and monitoring for vault subsystems?
• How often should grease or oil be added to the lock cylinder when lubricating locks?
• When should primary, spare, and control keys to munitions facilities be inventoried?
• Which weapon storage and security system (WS3) group uses portable modules to store and transfer encryption keys?
• What type of maintenance is similar to performing an oil and filter change on a personally owned vehicle?
• Which storage structure is ideal for providing courtesy storage for custody accounts?
• What type of nuclear weapon related materiel assets are managed in the combat ammunition system?
• Which program in the Tactical Missile Reporting System allows the entry of a missile's flight hour data?
• Through which on-base agency are all mishaps coordinated?
• What is considered a primary factor for munitions accountability?
• Which platform is used for reporting mishaps involving Air Force owned nuclear certified equipment?
• Who is responsible for providing a safe and healthy work environment for Air Force personnel?
• Which of the following is NOT a part of the workplace safety culture?
• Reaching the 7-skill level signifies advancement from a journeyman to a?
• Which munitions element is not required at deployed locations or for units that do not support aircraft?
• What is required for a container to be considered reusable?
• Where can you find general skill level training requirements and career path progression information?
• Which combat ammunition system report is included with munitions shipments IAW TO 11A110?
• What form is used to document munitions movements when direct input methods are not utilized?
• What is the minimum frequency for inventorying risk category I missiles?
• When a munitions squadron is authorized, which additional AF specialty is often added as a flight within?
• Which major command (MAJCOM) document contains the type and quantities of conventional munitions to be stocked at your base?
• Which Department of Defense risk category consists of complete man-portable nonnuclear missiles and rockets that are in a ready to fire configuration?
• What section within the munitions flight is responsible for planning and controlling all munitions activities?
• What is a munitions storage magazine?
• Which plan is primarily developed for locations without a permanent Air Force presence?
• How often are time change requirements provided to the munitions accountable systems officer?
• Which career field subdivision loads nuclear and nonnuclear air-to-air munitions, explosives, and propellant devices on aircraft?
• What is the maximum number of lite boxes permitted per stock/lot number in one base stock location?
• Which type of munitions is primarily used against armored targets?
• What should be the first procedure during an initial munitions inspection?
• What is a primary concern when dealing with flare/flare dispensers?
• For a reusable container to be considered usable, what must it be capable of?
• Which of the following is a responsibility of the munitions supervision?
• What is the primary purpose of inspecting inert and empty munitions items?
• Which order provides the combatant commander essential execution planning information when process acceleration is required?
• Which document outlines the procedures for munitions handling and accountability?
• What type of barricade is typically used for munitions on flightlines associated with aircraft operations?
• What are the first steps needed prior to starting 5-skill level upgrade training?
• Which area in the maintenance group manages the technical order improvement program?
• Where are redistribution orders and lateral support requests submitted for action?
• What does the acronym CDC stand for in munitions systems?
• What system is normally used to gain entry to a munitions storage area?
• Who is the appointing official for a munitions accountable systems officer (MASO) on an Air Force installation?
• What is the primary container used by the USAF for transporting munitions by sea?
• When is a report of survey always necessary concerning a munitions item loss?
• Which Air Force computer system is used specifically for updating missile records at the base level?
• Which method is primarily used to request and allocate munitions for training and operations?
• How do you correct an erroneous red dash or red diagonal entry on an AFTO Form 244?
• Which unserviceable item tag is used on munitions that are not economical to repair?
• Which order is issued by the Secretary of Defense to direct the deployment and/or employment of forces?
• Which is a characteristic of buffered storage?
• What is a crucial factor in ensuring the safety of munitions handling?
• Which forecast component significantly affects munitions readiness?
• What document is commonly used for shipping munitions from army depots or contract facilities?
• When is it acceptable to modify a munitions item without prior authorization?
• An electrical storm is considered "in the near vicinity" when it is within approximately how many miles of the munitions storage area?
• Who is responsible for managing the base war reserve material (WRM)?
• Which form is used to report product quality deficiencies?
• Which protection level applies to facilities such as Air Force accounting and finance vault areas?
• In the location designator 34A003C001E, what does the "A" represent?
• Which publication offers certifying guidance for inspectors of munitions residue and empty containers?
• Controlled inventory item codes are used to:
• What is the minimum skill level requirement for becoming a certified munitions expert?
• Which United Nations specification aims to keep hazardous materials contained and safe from the environment?
• What term describes the expected amount of munitions available for the command in a fiscal year?
• Some items included in explosive class/division 1.2 are?
• Which computer database helps the munitions accountable systems officer (MASO) maintain munitions accountability and provides "real-time visibility" to higher headquarters?
• In the Munitions Systems Career Field, what is expected of a 9-skill level superintendent?
• When dealing with a ballooned barrier bag, which document should be referenced for specific item instructions?
• What type of program is the Management Internal Control Toolset (MICT)?
• Facilities storing conventional munitions fall under which physical security protection level?
• Who is responsible for verifying the inventory of munitions keys?
• What should be done to ensure munitions are properly stored?
• Which level of security clearance must an Airman of the 2X0X1 specialty be capable of receiving?
• When assessing a munitions shipment, which document is crucial to verify its completeness?
• What type of information should be validated on a count sheet during an inventory?
• What primary factor helps assess an individual's reliability according to the PRP?
• What is the primary purpose of a fire symbol in munitions storage?
• Who develops the munitions employment plan at the base level?
• Which element within the production section maintains data for the Tactical Munitions Reporting System?
• What determines the patterns of munitions consumption in both training and operations?
• Who can stop an operational procedure involving explosives?
• What is the primary responsibility of the munitions operations team ?
• How many digits are in the location designator for munitions?
• What is the residue called that remains after the explosive filler of a munitions item is removed?
• What type of facility is typically used to store class/division 1.3 and 1.4 munitions?
• Which inspection ensures that an item is suitable for intended use before being signed over to a user?
• What type of hazards do explosive materials present in munitions systems?
• During which months should semi-annual munitions inventories be initiated and completed?
• Which unit is responsible for the overall management of munitions at an installation?
• Which class/division explosions generally cause severe structural damage to adjacent objects?
• What is the most efficient way to gather information when developing a munitions employment plan?
• Who is responsible for submitting a transportation discrepancy report (TDR)?
• What process refers to munitions items that have been consumed?
• What aspect does munitions category code primarily focus on?
• In which wing(s) is a Commander's Inspection Program (CIP) required for conducting internal inspections?
• Which type of munitions poses a forward firing ordnance hazard?
• What type of munitions issue must be prioritized during the inventory process?
• What should missile safety personnel be familiar with?
• What is the significance of the designated bay in a warehouse as indicated by the location designator?
• Which minimum grade must be reached to be qualified as a munitions superintendent (2W091)?
• What type of hazards do properly constructed or natural barricades primarily protect against?
• How often should fire drills be conducted within an explosive storage area?
• Who is responsible for publishing munitions inventory dates to the base populace?
• Which system allows ammo trainees and trainers to electronically document individual training records?
• Which type of maintenance is scheduled after a specific amount of time, such as 30, 180, or 360 days?
• What reporting flag word alerts agencies to nuclear surety deficiencies?
• What is a basic principle to follow when using technical orders (TO)?
• What does the Management Internal Control Toolset (MICT) help track in real-time?
• Where should flammable materials be stored according to AFMAN 91-201 and AFI 91-203?
• In the location designator 34A003C001E, what does the "003" indicate?
• Which munitions element determines and assigns condition codes to munitions assets?
• Which of the following describes a critical position in the personnel reliability program?
• Which position is responsible for the management and training of all assigned shop personnel?
• What is the distance applied to any two explosives operating locations called?
• Before disposing of the AFTO Form 102, which database must historical records be updated in?
• Which program is used to request supplemental allocations and authorize loading them into the combat ammunition system?
• What is a reason for an external inspection by an outside agency?
• Which WS3 group is responsible for providing physical storage and security?
• Which statement best describes the role of the MASO?
• What is the main purpose of the munitions employment plan?
• Which factor is critical in determining the need for changes to fire symbols at munitions facilities?
• What are the two security areas a munitions systems specialist will normally encounter?
• Which organization regulates the transportation of explosives and other hazardous materials by water?
• During which phase is the War Consumable Distribution Objective most vital?
• If munitions items are classified as lost, stolen, or damaged, what does the relief of accountability document detail?
• What are the transportable munitions packages for specific aircraft systems known as?
• A typical technical order is broken down into what kind of sections?
• Which of the following is not a part of operations security (OPSEC)?
• Why is munitions stockpile management critical in the military?
• Who provides written permission for authorizing personnel entry into a restricted area?
• Which phase of munitions operations focuses on the delivery of weapons?
• Which status field within the Air Force Munitions Command and Control SharePoint (AF MC2) can provide specific fire and chemical symbol information for each location?
• Which agency must be notified about changes to fire and hazard symbols for munitions facilities?
• Which organization oversees the regulation of munitions in the Air Force?
• What are the two greatest dangers to munitions items?
• What is the most secure installation method for a hasp on a munitions storage facility door?
• Who is responsible for issuing the competent approval authority (CAA) and certification of equivalency (COE)?
• Where can you find missile requirements and applicable theater allocations?
• How many entry control points should be set up for each restricted area?
• How often should periodic inspections of munitions items be conducted?
• The publication you can find inspection requirements for a permanent or portable eyewash system is?
• Which annex of an operations plan identifies nonnuclear munitions requirements?
• What characteristic must the earth fill used in artificial barricades possess?
• What term describes the minimum distance required between potential explosion sites?
• Which method is NOT a basic rule used for reducing back injuries?
• Which area would not be considered a no-lone zone?
• What tool is established to manage requisitions and ensure readiness for contingencies?
• What must be verified for all munitions documents that are filed permanently?
• Which order provides an approved course of action and combat forces for planning purposes?
• Which procedure in the combat ammunition system allows correction of documentation errors without destroying the audit trail?
• What does the Munitions Accountable Systems Officer (MASO) primarily oversee?
• Which of the following is NOT part of the general inspection procedures?
• Which identification method is used to denote the intended use of munitions during forecasting?
• Which of the following is NOT a responsibility of the MASO?
• How often must high security locks securing classified munitions be rotated or replaced?
• One of the most difficult problems a supervisor has in training crewmembers is getting them to?
• What are personnel who are not normally part of an explosives operation but need to be present called?
• What type of inspection is primarily conducted for munitions safety?
• What should you use to have an original container built when it is unavailable?
• What governs the intrinsic radiation safety program in the Air Force?
• What is the required identification format for a container loaded into the combat ammunition system?
• What report is used to identify a shipping-related problem caused by the shipping activity?
• Which of the following best describes the function of munitions supervision?
• What must be done to the old munitions identification before certifying a container as empty?
• The personnel reliability program (PRP) is divided into which two positions?
• Who is responsible for ensuring the accuracy and completion of all maintenance actions performed at the lowest level?
• Which documentation is essential for tracking munitions from depots?
• One responsibility of a munitions accountable systems officer (MASO) is to:
• Under the Air Force Occupational Safety program, what is a shared responsibility of workers and supervisors?
• Which munitions system is typically used for precision strikes?
• What is the governing directive for hazardous materials movement by military air?
• Who decides what must be counted during munitions account inventories?
• Which command has cradle-to-grave responsibility of a weapon system?
• Which element works with munitions control for flightline support activity?
• Which process is responsible for introducing an item into the base munitions inventory?
• Which of the following best describes the process of demilitarization?
• What is the maximum time an organization has to expend a consumption issue item from the date of issue?
• Who is responsible for overall supervision of the munitions unit?
• What type of lubricant should be used on a lock that won't open, after confirming the keyway is clear?
• Which agency maintains the Air Force's operational air-intercept and air-to-ground missile inventory?
• Which of the following is an example of a packaging discrepancy?
• When can the munitions accountable systems officer exceed approved stock levels when ordering items?
• What is the most used section of the Career Field Education and Training Plan for upgrade training?
• Which element maintains inspection results of grounding systems?
• What is the main goal during a base recall?
• What type of information do emergency action checklists provide?
• What type of shipping is characterized by transporting unpackaged items in large quantities?
• Which course must be completed before a craftsman can be upgraded to a superintendent?
• What is the protection given to very-high-risk and high-risk items (Categories 1 and 2) unless another condition exists?
• What is the purpose of performance-oriented packaging?
• Which of the following best illustrates a serviceable condition code?
• What does the term "unserviceables" refer to in munitions management?
• What type of items should be stored using the lite box protocol?
• Which AFI outlines safety procedures in the Air Force regarding munitions?
• What is a logistics and maintenance support indicator that could signal an OPSEC vulnerability?